Junkers ZW20/23 Safety Valve 87074010260

Name: ✅ Junkers ZW20/23 Safety Valve 87074010260 » Electro Cholo
SKU: 87074010260
Price: 15.16 EUR
Availability: InStock
Rating: 5.00 (3 reviews)

Rated 5.00 out of 5 based on 3 customer reviews

3 reviews

15,16€

Shipping in 48/72h.

Reference: 87074010260 Categories: BOILERS, Water, SPARE PARTS Tags: New, Original Replacement Part
MPN:87074010260
Brand: Junkers Neckar Brand: Junkers Neckar

Junkers ZW20/23 Safety Valve 87074010260

The overpressure valve is a very important component in a boiler.

If the valve is not working properly, dangerous pressure levels could be reached in a domestic boiler.

Excessive pressure within the system could cause the boiler or water pipes to burst. If the temperature and pressure inside the boiler are within the normal range of 1.5 to 3 bar and the safety valve is leaking, it indicates a faulty Junkers ZW20-ZW23 boiler overpressure valve

Replace the faulty valve immediately.

STEP 1

Turn off the boiler. In many cases, the boiler will have a switch. If not, unplug it from the power supply

Also close the fill valve that supplies water to the boiler system. This step is extremely important. Wait for the boiler and the water to cool down.

STEP 2

Drain the water from the boiler to reduce the pressure by opening the boiler's drain valve. Observe the pressure gauge on the boiler. When the pressure reads zero, close the valve to stop the water from draining.

Step 3

Connect a pipe wrench to the boiler's safety valve. Loosen the valve and remove it from the boiler. If the valve has a drain pipe connected, remove the drain pipe before removing the valve.

Step 4

Wrap Teflon tape around the two lower threads of the new valve.

Turn the new valve onto the boiler and tighten it with a pipe wrench. Make sure it's straight and pointing in the same direction as the old valve. Reconnect the drain pipe if necessary.

Step 5

Open the fill valve to refill the system with water and restore power to the boiler. Bleed the air from the system by opening the bleed valves on your radiators. For most radiators, a screwdriver is required to operate the bleed valves. Check for leaks at the newly installed valve.

Overpressure valve for Junkers ZW20 ZW23 boiler

Visit our spare parts section

Compatible Models

7712231781 ZS23AE23S2805
7712244853 ZS23AE31S2805
7712230849 ZS23KE23S2895
7712243875 ZS23KE31S2895
7713231801 ZW20-2AME23S2805
7713244848 ZW20-2AME31S2805
7713230104
ZW20-2KD23S2895 7713243092 ZW20-2KD31S2895
7713230837 ZW20-2KE23S2895
7713243852 ZW20-2KE31S2895
7713231788 ZW23AE23S2805
7713244844 ZW23AE31S2805
7713230809 ZW23KE23SOS2895
7713230831 ZW23KE23S2895
7713243850 ZW23KE31S2895
7712231742 ZS23AE23S3505
7712244840 ZS23AE31S3505
7712230841 ZS23KE23S3595
7712243873 ZS23KE31S3595
7713231755 ZW23AE23S3505
7713244834 ZW23AE31S3505
7713230817 ZW23KE23S3595
7713243847 ZW23KE31S3595

3 reviews for Junkers ZW20/23 87074010260 safety valve

5,0

Based on 3 reviews.

100

100%

Rated 5 out of 5

Camille Mathieu Lefebvre Durand – November 5, 2024

Installed on a ZSC35 chaudière, this safety soup ensures a maximum pressure of 3 bar. Aucun degagement d'eau matériel après installation

(0) (0)
Rated 5 out of 5

Plumber Paredes Martín – December 22, 2024

Good for ZW23-1KE23. Very fast shipping

(0) (0)
Rated 5 out of 5

Rafael Andrés Soto Giménez – June 15, 2025

I installed the Junkers 3 bar safety valve on my ZWBC

(0) (0)